Holtek New Universal Writer — e-WriterPro
| Item |
Box content item name |
Number |
| 1 |
e-WriterPro |
1 |
| 2 |
USB Cable |
1 |
| 3 |
5V USB Power Adapter |
1 |
| 4 |
Ground Wire (1.5M)
|
1 |
| 5 |
Flat-Cable |
1 |
| 6 |
CD |
1 |
| 7 |
Screws |
1 |
| 8 |
Important Information |
1 |
* Combined products and optional accessories: e-Socket
The e-WriterPro can be used not only as a programming tool for all of Holtek’s OTP and Flash devices during the development stage but can also be used for small to medium volume production purposes.
The e-WriterPro must be used together with a corresponding e-Socket according to the package type of the MCU that is to be programmed. Devices with the same package type require only a single e-Socket, thus reducing the problem of changing different adaptors for different IC part numbers.
User's
Guide: |
Holtek e-Writer Series Writer User's Guide |
Software: |
HOPE3000Setup.exe (V3.03) |
Software Version History: |
Release History |
Supported MCU List: |
Holtek All series MCUs |
|
|
Firmware version: |
e-Writer Pro V0104 |
| |
Old Version Programming Tool Inquiry
|
