|
Points to Note
Question 1
When using the HIRC, if the I/O pin which is shared with OSC1 is to be used as an AC zero crossing detector, will there be any influence on the HIRC oscillation frequency? If yes, which MCUs will be affected and how can this problem be resolved?? Answer
If the HIRC is used and if the I/O pin which is shared with OSC1 is used as an AC zero crossing detector pin, the HIRC oscillation frequency will be influenced.
The affected MCUs are:
All MCUs whose I/O pin is pin-shared with OSC1 (including the enhanced OTP type MCU and Flash type MCU etc.)
How to resolve this issue:
1. Avoid using the I/O pin that is shared with OSC1 as AC zero crossing detector pin.
2. If the problem can still not be resolved, add external circuitry to ensure that the voltage applied on the OSC1 pin remains withing the range of VDD and VSS.
|
