|
HT66F20/HT66F30/HT66F40/HT66F50/HT66F60/HT66FU30/HT66FU40/HT66FU50/HT66FU60
-- Enhanced A/D Flash Type MCU 8-Bit MCU with EEPROM General Description
The HT66FXX series of devices are Flash Memory
A/D type 8-bit high performance RISC architecture microcontrollers.
Offering users the convenience of Flash Memory multi-programming
features, these devices also include a wide range of functions and
features. Other memory includes an area of RAM Data Memory as well
as an area of EEPROM memory for storage of non-volatile data such as
serial numbers, calibration data etc.
Analog features include a multi-channel 12-bit
A/D converter and dual comparator functions. Multiple and extremely
flexible Timer Modules provide timing, pulse generation and PWM
generation functions. Communication with the outside world is
catered for by including fully integrated SPI or I2C interface
functions, two popular interfaces which provide designers with a
means of easy communication with external peripheral hardware.
Protective features such as an internalWatchdog Timer, Low Voltage
Reset and Low Voltage Detector coupled with excellent noise immunity
and ESD protection ensure that reliable operation is maintained in
hostile electrical environments.
A full choice of HXT, LXT, ERC, HIRC and LIRC
oscillator functions are provided including a fully integrated
system oscillator which requires no external components for its
implementation. The ability to operate and switch dynamically
between a range of operating modes using different clock sources
gives users the ability to optimise microcontroller operation and
minimise power consumption.
The UART module is contained in the HT66FUx0
series of devices. It can support the applications such as data
communication networks between microcontrollers, low-cost data links
between PCs and peripheral devices, portable and battery operated
device communication, etc.
The inclusion of flexible I/O programming
features, Time-Base functions along with many other features ensure
that the devices will find excellent use in applications such as
electronic metering, environmental monitoring, handheld instruments,
household appliances, electronically controlled tools, motor driving
in addition to many others.
|
Features
CPU Features
- Operating Voltage:
fSYS= 8MHz: 2.2V~5.5V
fSYS= 12MHz: 2.7V~5.5V
fSYS= 20MHz: 4.5V~5.5V
- Up to 0.2us instruction cycle with 20MHz system clock at VDD=5V
- Power down and wake-up functions to reduce power consumption
- Five oscillators:
External Crystal - HXT
External 32.768kHz Crystal - LXT
External RC - ERC
Internal RC - HIRC
Internal 32kHz RC - LIRC
- Multi-mode operation: NORMAL, SLOW, IDLE and SLEEP
- Fully integrated internal 4MHz, 8MHz and 12MHz oscillator
requires no external components
- All instructions executed in one or two instruction cycles
- Table read instructions
- 63 powerful instructions
- Up to 12-level subroutine nesting
- Bit manipulation instruction
Peripheral Features
- Flash Program Memory: 1Kx14 ~ 12Kx16
- RAM Data Memory: 64x8 ~ 576x8
- EEPROM Memory: 32x8~256x8
- Watchdog Timer function
- Up to 50 bidirectional I/O lines
- Software controlled 4-SCOM lines LCD driver with 1/2 bias
- Multiple pin-shared external interrupts
- Multiple Timer Module for time measure, input
capture, compare match output, PWM output or single pulse output
function
- Serial Interfaces Module - SIM for SPI or I2C
- Dual Comparator functions
- Dual Time-Base functions for generation of fixed time interrupt
signals
- Multi-channel 12-bit resolution A/D converter
- Low voltage reset function
- Low voltage detect function
- Optional peripheral -- UART module for fully duplex asynchronous
communication
- Wide range of available package types
- Flash program memory can be re-programmed up to 100,000 times
- Flash program memory data retention > 10 years
- EEPROM data memory can be re-programmed up to 1,000,000 times
- EEPROM data memory data retention > 10 years
|
|
Technical Document |
|
|
Other Information
|
|
|
|
|