HT7L2102 -- Anti-EMI, High Efficiency Dimmable LED Lighting Driver with Green Mode and Integrated Protections

General Description

The HT7L2102 is an advanced, highly integrated LED Lighting driver using an AC-DC isolation topology. The device provides many protection functions and uses ultra low power circuit design, and is optimized to restrict EMI. By integrating a Non-Audible Noise Green Mode Control Structure, users can implement a single circuit for different LED load levels for various series/parallel configurations but still maintain high efficiency for different load conditions. This device also integrates various protection functions for LED Lighting requirements such as Cycle-by-Cycle Current Limiting, Short-Circuit  Protection (SCP), Over-Voltage Protection (OVP), Over-Temperature Protection (OTP) for external thermistor sensing, and a Soft-Start function to reduce inrush currents during LED power system initialization for the prevention of device burn-out.

The HT7L2102 provides a 1~99% PWM Dimming Range with duty-cycle scale precision lower than 1%.

Features

  • Frequency Jitter for EMI Restriction
  • Integrated Soft-Start Function
  • Very Low Operating Current and Start-up Current (<20mA) for satisfying Energy-Star 2.0 "No-Load Mode" (Stand-by) Power standard
  • ±5% Trimmed Oscillator for Precise Frequency
  • Non-Audible-Noise Green Mode Control to maintain efficiency for both Light and Heavy Loads
  • LEB (Leading-Edge Blanking) on CS Pin
  • Internal Slope Compensation
  • Cycle-by-Cycle Current Limiting
  • Short-Circuit-Protection(SCP) for Short-Circuit and Over-Load Condition
  • Over-Voltage-Protection(OVP) on VCC Pin
  • Over-Temperature-Protection(OTP) on TS pin for External Thermistor Sensing
  • 1~99% PWM Dimming Range
  • 8-pin SOP package

Technical Document

Other Information