e-Link: Holtek OCDS/ICP adaptor

The e-Link is an online debug adaptor for Holtek's new generation of OCDS architecture Flash MCUs. Together with the HT-IDE3000 software it allows users to program and debug programs on their target boards.
※The e-Link only supports OCDS architecture Flash MCUs.
※For each new e-Link being used for the first time, it must be enabled by using the activation program.

The e-Link also provides an ICP function for Flash MCUs. When connected to a PC and when used together with the HOPE3000 software the e-Link can also be used as a low volume engineering programmer for HT8 Flash MCUs.
※The e-Link is not able to support offline programming and is not suitable for volume device programming.
※The e-Link does not yet support programming of the Boot Loader ROM code program. As a result it should not be used for programming application programs which have an ISP requirement such as the HT6XFB5X0.

USB Cable CD Important Information e-Link Flat-Cable (e-cable1225A) e-FPC06A  2×6 Pin Double-Row Male Headers

Item Box content item name Number
1 e-Link 1
2 Flat-Cable (e-cable1225A) 1
3 Mini USB Cable 1
4 e-FPC06A 1
5 2×6 Pin Double-Row Male Headers 2
6 Important Information 1

 Combined products and optional accessories: e-FADPXXX

HOPE3000 For e-Link Download the latest release V1.12

Holtek e-Link OCDS User's Guide

Holtek e-Link ICP User's Guide

Holtek e-Link Q&A