|
HT25LC512 --
CMOS 64kx8-Bit SPI Serial OTP EP ROM(限用產品)
General Description
The HT25LC512 is a 512K-bit OTP ROM
of which function and pin assignment are compatible with AT25F512 and
can directly replace the AT25F512 for cost down purposes when the
memory in the system is just read only. There are 512K bits of memory
which are organized as 65536 words of 8 bits each. The HT25LC512 uses a
serial interface to sequentially access its data.
The simple serial interface
facilitates hardware layout, increase system reliability, minimize
switching noise, and reduce package size and active pin count. The
device is optimized for use in many commercial and industrial
applications where high density, low pin count, low voltage, and low
power consumption are essential. The device operates at clock
frequencies up to 10MHz.
The HT25LC512 is enabled through the chip select pin (CS) and accessed via a three-wire interface consisting
of the Serial Input (SI), Serial Output (SO), and the Serial Clock
(SCK). The HOLDB pin may be used to suspend
any serial communication without resetting the serial sequence.
|
Features
- Operating voltage: 2.7V~3.6V
- Programming voltage
- VPP=12.5V±0.2V
- VCC=6.0V±0.2V
- 512K-bit OTP ROM, access command compatible with AT25F512
- 64K8-bit organization
- 12MHz max. clock frequency @VCC=2.7V
15MHz max. clock frequency @VCC=3.0V
- Serial interface architecture
- Serial Peripheral Interface (SPI) compatible - modes 0 and 3
- CMOS and TTL compatible inputs and outputs
- Pin assignment compatible with AT25F512
- Commercial temperature range (0oC to +70oC)
- 8-pin SOP package
|
|
|