|
HT0610 -- 33x120 LCD Driver (限用產品)
General Description
The HT0610 is a driver and controller LSI for graphic dot-matrix liquid crystal display systems. It has 33 common
and 120 segment driver circuits. This chip is connected directly to an
MCU, accepts 8-bit parallel display data and stores an on-chip graphic display data RAM
(BGDRAM) of 33´120
bits. It provides a high-flexible between BGDRAM bits and LCD panel
pixels. It performs BGDRAM read/write operation with no externally
operating clock to minimize power consumption. In addition, because it
contains power supply circuits necessary to drive an LCD, it is
possible to make a display system with minimal components. consumption.
|
Features
- Operating voltage: 2.4V~3.5V
- 33 common/120 segment LCD driver output
- 33´120=3960 bits capacity of built-in graphic display data RAM (BGDRAM)
- Master and slave mode available for multi-chip operation
- 8-bit Parallel interface with general MCU
- On-chip oscillator circuit for display clock, external clock can also be used
- Selectable multiplex ratio: 1/16, 1/32, 1/33
- Selectable bias ratio: 1/5 or 1/7
- External driving circuit for external bias supply
- On-chip selectable voltage doublers and tripler
- Wide range of operating temperature: -30°C to 85°C
- S/W controlled electronic contrast control function (16 levels)
- External contrast control
- Low power icon mode driven by com32
- Four static icon driver circuit
- High accuracy voltage regulator with temperature coefficient (0.00%, -0.18%, -0.22%, -0.35%)
- Low power consumption
- Read/write mode 170mA (Typical)
- Display mode 160mA (Typical)
- Standby mode 15mA
(Typical; Display off; internal oscillator enable)
- Standby mode < 1mA
(Typical; Display off; external oscillator enable)
- CMOS process
- TCP available
|
|
|