HT82V36 -- 16-Bit CCD/CIS Analog Signal Processor

General Description

The HT82V36 is a complete analog signal processor for CCD imaging applications. It features a 1-channel architecture designed to sample and condition the outputs of linear CCD arrays. It consists of an input clamp, Correlated Double Sampler (CDS), offset DAC and Programmable Gain Amplifier (PGA), and a low power 16-bit A/D converter.

The CDS amplifiers may be disabled for use with sensors such as Contact Image Sensors (CIS) and CMOS active pixel sensors, which do not require CDS.

The 16-bit digital output is multiplexed into an 8-bit output word that is accessed using two read cycles. The internal registers are programmed through a 3-wire serial interface, which provides gain, offset and operating mode adjustments.

Features

  • Operating voltage: 3.3V
  • Low power consumption at 56mW
  • Power-down mode: Under 1µA (clock timing keep low)
  • 16-bit 6 MSPS A/D converter
  • Guaranteed no missing codes
  • Supports CDS/SHA mode
  • 1~6 programmable gain
  • ±200mV programmable offset
  • Input clamp circuitry
  • Internal voltage reference
  • Multiplexed byte-wide output (8+8 format)
  • Programmable 3-wire serial interface
  • 3.3V digital I/O compatibility
  • 28-pin SSOP (209mil) package

技術相關資訊

其他相關資訊