|
HT9480 -- 8-Bit Numerical Pager Controller MCU (限用產品)
General Description
The HT9480 is a high performance pager
controller. The built-in single cycle instructions
(16-bit wide) and two-stage pipeline architecture of the
HT9480 account for its high performance. The controller
contains a full function pager decoder (POCSAG code) at
512, 1200, or 2400 bits per second data rate and an LCD
display driver with a 35x4 dot output.
|
Features
- Operating voltage: 2.4V~3.3V
- Low power crystal oscillator control
- 512, 1200, or 2400 bps data rate operation
- Decodes CCIR Radio-paging Code No.1 (POCSAG Code)
- 2-bit random and optional 4-bit burst error
correction
- Improved synchronization algorithm
- Supports up to 6 independently programmable user
addresses and 6 user frames
- Three RF power on timing control pins
- Single crystal for all available baud rate
(76.8kHz crystal)
- Battery low indication (external detector)
- Battery fail interrupt and data ready interrupt
- 8Kx16 program ROM
- 416x8 data RAM
- 35x4 LCD display
- 7 input lines and 10 bidirectional I/O lines
- 8-bit programmable timer for RTC interrupt
- 8-bit programmable timer/event counter and
overflow interrupt
- 8-bit programmable tone generator with buzzer
output
- Watchdog timer
- HALT function and wake-up feature reduce power
consumption
- 63 powerful instructions, most instructions in
one machine cycle
- Eight-level subroutine nesting
- Table read instruction
- Inverted or non-inverted input signal selection
for decoder input
- 80-pin LQFP (12x12) package
|
|
|
