HT68F20/HT68F30/HT68F40/HT68F50/HT68F60/HT68FU30/HT68FU40/HT68FU50/HT68FU60 --
Enhanced I/O Flash Type MCU 8-Bit MCU with EEPROM

General Description

The HT68FXX series of devices are Flash Memory I/O type 8-bit high performance RISC architecture microcontrollers. Offering users the convenience of Flash Memory multi-programming features, these devices also include a wide range of functions and features. Other memory includes an area of RAM Data Memory as well as an area of EEPROM memory for storage of non-volatile data such as serial numbers, calibration data etc.

Multiple and extremely flexible Timer Modules provide timing, pulse generation and PWM generation functions. Analog features include dual comparator functions. Communication with the outside world is catered for by including fully integrated SPI or I2C interface functions, two popular interfaces which provide designers with a means of easy communication with external peripheral hardware. Protective features such as an internal Watchdog Timer, Low Voltage Reset and Low Voltage Detector coupled with excellent noise immunity and ESD protection ensure that reliable operation is maintained in hostile electrical environments.

A full choice of HXT, LXT, ERC, HIRC and LIRC oscillator functions are provided including a fully integrated system oscillator which requires no external components for its implementation. The ability to operate and switch dynamically between a range of operating modes using different clock sources gives users the ability to optimise microcontroller operation and minimise power consumption.

The UART module is contained in the HT68FUx0 series of devices. It can support the applications such as data communication networks between microcontrollers, low-cost data links between PCs and peripheral devices, portable and battery operated device communication, etc.

The inclusion of flexible I/O programming features, Time-Base functions along with many other features ensure that the devices will find excellent use in applications such as electronic metering, environmental monitoring, handheld instruments, household appliances, electronically controlled tools, motor driving in addition to many others.

Features

CPU Features

  • Operating Voltage:
    fSYS= 8MHz: 2.2V~5.5V
    fSYS= 12MHz: 2.7V~5.5V
    fSYS= 20MHz: 4.5V~5.5V
  • Up to 0.2us instruction cycle with 20MHz system clock at VDD=5V
  • Power down and wake-up functions to reduce power consumption
  • Five oscillators:
    External Crystal -- HXT
    External 32.768kHz Crystal -- LXT
    External RC -- ERC
    Internal RC -- HIRC
    Internal 32kHz RC -- LIRC
  • Multi-mode operation: NORMAL, SLOW, IDLE and SLEEP
  • Fully integrated internal 4MHz, 8MHz and 12MHz oscillator requires no external components
  • All instructions executed in one or two instruction cycles
  • Table read instructions
  • 63 powerful instructions
  • Up to 12-level subroutine nesting
  • Bit manipulation instruction

Peripheral Features

  • Flash Program Memory: 1Kx14 ~ 12Kx16
  • RAM Data Memory: 64x8 ~ 576x8
  • EEPROM Memory: 32x8 ~ 256x8
  • Watchdog Timer function
  • Up to 50 bidirectional I/O lines
  • Software controlled 4-SCOM lines LCD driver with 1/2 bias
  • Multiple pin-shared external interrupts
  • Multiple Timer Module for time measure, input capture, compare match output, PWM output or single pulse output function
  • Serial Interfaces Module - SIM for SPI or I2C
  • Dual Comparator functions
  • Dual Time-Base functions for generation of fixed time interrupt signals
  • Low voltage reset function
  • Low voltage detect function
  • Optional peripheral -- UART module for fully duplex asynchronous communication
  • Wide range of available package types
  • Flash program memory can be re-programmed up to 100,000 times
  • Flash program memory data retention > 10 years
  • EEPROM data memory can be re-programmed up to 1,000,000 times
  • EEPROM data memory data retention > 10 years

技術相關資訊

其他相關資訊